XD, HD, LL, MD – Actuators for industrial applications
Electrak XD heavy-duty electric linear actuator
An actuator that can withstand the harshest conditions (IP69k) and any weather (-40° to 85°C)
Electrak XD
_x000D_The Thomson Electrak XD is a powerful electric linear actuator that has been designed to replace hydraulic systems. It offers truly impressive performance: dynamic/static loads of up to 25/32 kN, stroke lengths of up to 1200 mm and speeds of up to 75 mm/s. It is equipped with a built-in load holding brake, an optional shock absorber and a manual override function for actuation in the event of a power failure, along with integrated control to keep everything more firmly under your command. The Electrak XD is compact, efficient, resistant to environmental influences and meets the requirements of various protection classes, from IP66 to IP69K.
_x000D__x000D_
Electrak HD
_x000D_Because of the greater force that is possible and – on request – the longer stroke, the Electrak HD can also accommodate applications that are beyond the reach of other electric linear actuators.
_x000D_The Thomson Electrak HD is optionally available with synchronisation!
_x000D_Synchronisation allows the integrated movement of several actuators.
_x000D_Features
_x000D_- _x000D_
- Stroke length of up to 1000 mm _x000D_
- Lifting capacity of up to 16 kN (16,000 N) _x000D_
- Temperature range: - 40°C to + 85°C _x000D_
- IP69K/IP67 protection class (static) _x000D_
- IP66 protection class (dynamic) _x000D_
- Connection voltages: 12 / 24 / 48 VDC _x000D_
- Optional CANopen or SAE J1939 CAN bus connection _x000D_
- Installing several synchronised actuators provides designers with the following benefits: a more stable stroke (and potentially a faster one), no need for additional guidance and better handling of asymmetrical loads. _x000D_
- The integration of the control into the actuators simplifies installation and system wiring. _x000D_
- Perfect for lift tables, engine bonnets and other equipment where the design must accommodate unevenly distributed or off-centre loads. _x000D_
_x000D_
Electrak LL – the new long-life actuator
_x000D_Thanks to its durability, the Electrak LL can also be used in cases where there was previously little or no chance of using electric linear actuators
because of their limited life expectancy. This advantage is particularly important for industrial applications where systems often have to run around the clock
Features:
_x000D_- _x000D_
- Long life expectancy _x000D_
- High duty cycle _x000D_
- Constant speed independent of the load _x000D_
- Designed and tested for the toughest ambient conditions _x000D_
- Complies with railway standards EN 50155, EN 60077 and EN 45545 _x000D_
- Integrated electronics eliminate the need for separate control units _x000D_
- Perfect for switching over to electric actuators from hydraulic or pneumatic solutions _x000D_
_x000D_
Electrak MD
_x000D_Designed as a smaller companion to the Electrak HD®, these smart electric linear actuators deliver an impressive amount of power relative to their compact size – and will happily run under even the most adverse ambient conditions without requiring any maintenance. Their integrated control functions open the door to a wide range of possibilities – whether that be a CAN bus connection or low-current switching with and without position feedback.
_x000D__x000D_
Max Jac electric linear actuator
_x000D_THOMSON’s powerful linear actuator for the toughest of operating conditions (IP69K)
_x000D_The Max Jac can be used for a wide range of applications, but its true strength lies in tackling the toughest of operating conditions. Every component of the actuator has been designed for durability, reliability and high performance.
_x000D_Features
_x000D_- _x000D_
- Duty cycle of up to 100% , 25% of full load _x000D_
- Temperature range: - 40°C to + 85°C _x000D_
- Long service life _x000D_
- High degree of corrosion protection _x000D_
- Short overall length compared to the stroke length _x000D_
- Vibration-resistant _x000D_
_x000D_
Load Master – LM80 rodless compact unit
_x000D_Complete compact unit
Powerful and reliable spindle drives for horizontal and vertical applications.
Compact and predefined configurations based on the integrated electric motor.
Features
_x000D_- _x000D_
- Speeds from 13 to 110 mm/s _x000D_
- Lifting capacity of up to 2000 N _x000D_
- Stroke length of up to 1500 mm _x000D_
- Low weight and quiet operation _x000D_
- Maintenance-free _x000D_
_x000D_
Electro-hydraulic linear actuator
_x000D_Warner H-Track products have a patented fluid power system that offers high load capacities for extreme applications. In addition, they feature a more compact installation size than actuators with an identical load rating, as well as ingress protection and corrosion resistance.
_x000D_The concept involves connecting an external gear pump to a combined reservoir/actuator, making the H-Track the most impact resistant of all the Warner actuators.
_x000D_Features
_x000D_- _x000D_
- Stroke length of up to 305 mm _x000D_
- Lifting capacity of up to 21,350 N _x000D_
- Speeds of almost 50 mm/s _x000D_
- Temperature range: -26°C to +65°C. (-40°C as option) _x000D_
- IP65 (dynamic) / IP67 & IP69K (static) _x000D_
- Piston rod does not require external anti-twist protection _x000D_
Contact us
